PDU socket cabinet special SPD surge band lamp lightning protection eight position hole aluminum alloy row.
Product Details
PDU lightning protection socket is a kind of lightning and surge pulse which can quickly absorb the power supply system. [1] ensures the safe use of electrical appliance in bad environment and multi mine area. It is specially used to protect the sensitive equipment of single-phase AC power supply. It is applied to the equipment end as the third level protection of the power supply.
Product features
1. with temperature and overcurrent failure protection circuit, it does not affect the normal operation of the circuit.
2. lightning protection socket has low residual pressure and large flow capacity
3. power indicator to monitor the power supply of the converter
Product specification
1.Rated Operating Voitage(UC): 250V～
2.Voltage protective level(UP):1.0KV
3. Max discharge current(IMAX):6KA
4. Nominal discharge current(IN):3KA
5. Protection mode: L-N
6. technical parameter: MAX2.5KW-MAX10A
Working principle of product
The surge protector of PDU lightning protection socket is very high when no voltage is needed, which is equivalent to breaking circuit. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.
Use of attention
1. lightning protection socket frame type lightning protection socket press the power switch button, the grounding indicator light (yellow), indicating that the ground is reliable; the working light is bright (green), indicating the normal work of the lightning protection module; the power indicator light is bright (red), indicating the normal connection of the power supply.
2. The grounding terminal of the lightning protection socket is connected with the E terminal of the plug earth wire.
3. The grounding screw with 2.5m square meters above ground wire is connected to the power supply socket type surge protector on
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
Product Tags:
|
|
Eight Position Hole PDU Power Strip Lightning Protection Socket Aluminum Alloy Row Images
|
